Hours of Service • ELDT.LIVE
ELD Yard Moves for CDL Drivers: On-Duty Status, Private Property, and Logging Mistakes
Moving a tractor or trailer across a terminal is still work, but it may be recorded differently from highway driving. Learn where yard-move status applies, how it affects the HOS clocks, and what to do when the category was not selected before motion.
Yard move is a narrow way to record work-related vehicle movement
A yard move is not free time and it is not a separate supply of driving hours. It is a special ELD driving category used for qualifying CMV movement in a yard, such as repositioning equipment within a terminal or similar private-property facility. FMCSA guidance has long treated jockeying a commercial vehicle in a private-property yard as on-duty not driving. The category changes how the movement appears on the record of duty status; it does not turn work into rest, excuse unsafe operation, or authorize movement that should be recorded as driving.
The carrier enables the category and the driver makes the selection
Under 49 CFR 395.28, a motor carrier may configure an ELD to authorize yard moves for a driver. The option appearing in one driver's account does not prove that another driver or another carrier has authorized it. FMCSA guidance also permits ELD systems to apply carrier-configured conditions controlling when the driver can select the category. Drivers should obtain the written policy during orientation, confirm which facilities qualify, and know whom to contact when a location or movement is uncertain.
Yard move is a special category—not a fifth duty status
The four ordinary duty-status categories remain off duty, sleeper berth, driving, and on-duty not driving. Yard move is an indication that affects how the ELD records vehicle motion while the driver's duty status remains on-duty not driving. The graph grid may show the period with a dashed or dotted line, shading, and a YM abbreviation. Reading the category as a fifth status can lead to incorrect ideas about rest, the 14-hour window, or the weekly on-duty limit.
Private-property yard movement is the clearest qualifying case
FMCSA's current guidance states that a driver who jockeys CMVs in a yard on private property records that time as on-duty not driving. The agency's property-carrier HOS guide describes yard moves as transfers between locations within a terminal or similar facility on private property. Common examples can include moving a trailer from a staging row to a dock door, repositioning a tractor within a carrier terminal, shifting equipment inside a secured intermodal facility, or moving a combination between controlled areas of a private distribution center—provided the actual route and access fit the carrier's policy and federal guidance.
An ordinary public road is not an extension of the yard
A short distance does not automatically make public-road operation a yard move. FMCSA's driver guide says yard moves may not occur on a highway as that term is defined for the federal rules. A local street between two terminals, a public access road around a warehouse, a public truck-stop lane, or the road from a drop lot to a receiver can require driving status even when the trip lasts only a minute. Do not select YM merely because the movement is slow, local, empty, or described by dispatch as a shuttle.
Restricted access must be evaluated from the real operating facts
A gate, guard shack, sign, fence, flagger, port credential, or facility rule may help show that public access is restricted, but the label yard is not decisive by itself. Determine whether the traveled way is actually private or otherwise closed to ordinary public use, whether the public can operate four-wheeled vehicles there, and whether the carrier has approved YM for that exact route. If the movement touches an open roadway or crosses a jurisdictional boundary, stop and obtain a compliance determination instead of relying on a map pin or the customer's terminology.
Select yard move before the vehicle begins moving
Section 395.28 requires the driver to select the applicable authorized category before the start of the status and deselect it when the status ends. The ELD technical specifications likewise require the selection before the CMV is in motion if the movement is to remain on-duty not driving. The safest routine is to park, confirm the location and purpose, change to on-duty not driving, select YM, enter the requested annotation, verify that the screen shows the category, and only then release the brakes.
Use a useful annotation rather than a vague label
A strong annotation identifies the facility and work purpose without unnecessary personal information: for example, 'YM—reposition empty trailer from staging row C to dock 14 within secured ABC terminal.' Avoid comments such as yard, move, or dispatch said okay when they do not explain the route. The note should support the facts already recorded; it cannot convert an open-road trip into a yard move or fix an inaccurate duty status by assertion alone.
End the category as soon as the qualifying movement ends
When the driver finishes spotting the trailer or reaches the point where a different activity begins, stop safely and deselect YM. Select the duty status matching the next activity, such as on-duty not driving for paperwork or loading, driving for departure onto the highway, or off duty only when the driver is fully relieved from work and responsibility. Leaving YM active can misclassify a later movement, especially when the vehicle exits a gate or another employee takes control.
A power cycle normally resets the yard-move indication
Appendix A to Part 395 requires the ELD to reset a yard-move indication to none when the ELD or engine goes through a power-off cycle. Unlike authorized personal use, YM does not receive a continuation-confirmation exception in that provision. After an engine shutdown and restart, verify the screen before moving again. If more qualifying yard work remains, reselect YM and provide the required annotation; do not assume the previous selection survived.
If YM was not selected, the ELD records motion as driving
An ELD must automatically record driving when the vehicle is in motion unless the driver selected authorized personal use or yard move under the specified conditions before motion. The motion threshold and vendor interface may affect when the driving event appears, but a driver should never creep the vehicle, disconnect the ELD, log out, or use an unidentified profile to avoid the event. Accurate logging begins before the wheels turn, not after the vehicle has crossed the yard.
Automatically recorded driving cannot be changed to YM later
FMCSA's official ELD FAQ says that when a driver forgets to select yard move at the beginning or end, the automatically generated driving event cannot later be edited into YM. The ELD rule does not allow driving time to be shortened through that correction. The driver may add an annotation identifying the intended start and end and explaining the circumstances, but the original automatic driving time remains. This is why a two-second screen check before moving can prevent a much larger compliance problem.
An annotation documents the mistake; it does not erase it
If the category was missed, stop safely, select the correct status for the present activity, annotate the record truthfully, notify the carrier under its procedure, and preserve any facility or dispatch information supporting the explanation. Do not ask support staff to delete the event, split it among drivers, or invent a malfunction. Section 395.30 requires the driver and carrier to keep accurate ELD records, preserve originals through the edit history, annotate changes, and have the driver review and certify the final record.
Yard-move minutes count as on-duty time
Because YM is on-duty not driving, it counts toward total on-duty time. Spotting trailers, moving between dock doors, waiting under dispatch control, coupling, inspecting, and completing related paperwork are work activities, even if no public-road miles are accumulated. A driver should enter the yard with a realistic understanding of the available duty window. Ten short moves spread across a congested facility can consume substantial working time even though they do not reduce the 11-hour driving limit minute for minute.
The 14-hour window keeps running
For a property-carrying driver subject to 49 CFR 395.3, the 14-consecutive-hour period does not pause during YM. Once the work shift begins after the required off-duty period, yard work takes place inside that window. A driver who spends several hours loading and spotting equipment may have fewer lawful hours remaining in which driving is permitted, even if the ELD shows little highway driving. The category prevents qualifying yard motion from using the 11-hour driving total; it does not extend the end of the 14-hour driving window.
Yard moves add to the 60/70-hour calculation
On-duty not driving time contributes to the 60 hours in 7 days or 70 hours in 8 days limit that applies to the carrier's operation. A driver who performs weekend yard work after a week of road driving must include that on-duty time. The driver cannot drive after reaching the applicable cumulative on-duty limit unless a valid provision changes the calculation. Moving equipment only on private property does not make the work invisible for the next interstate driving assignment.
Qualifying YM does not consume the 11-hour driving total
When properly selected and used for a qualifying yard movement, YM remains on-duty not driving rather than driving, so it does not count toward the property-carrying driver's 11-hour driving total. That distinction is the recording purpose of the category. It is not permission to use YM on public roads, to extend a shift beyond what Section 395.3 permits, or to continue operating while fatigued. The location and nature of the work must justify the classification every time.
Thirty consecutive minutes of YM can satisfy the driving break
Current 49 CFR 395.3 allows the required interruption after eight cumulative hours of driving to be satisfied by 30 consecutive minutes of off-duty, sleeper-berth, on-duty not driving, or a combination of those statuses. FMCSA specifically confirms that yard-move time may satisfy the break if it is part of a 30-consecutive-minute period because YM is on-duty not driving. This does not make the period rest or stop the 14-hour clock; it only addresses the interruption-in-driving requirement.
Do not confuse yard move with personal conveyance
Personal conveyance is authorized personal use while the driver is off duty and relieved from work. Yard move is a work-related equipment movement recorded as on-duty not driving. Moving a trailer to a dock at the shipper's request is YM only if the location qualifies; it is not personal conveyance. Conversely, an off-duty driver directed merely to relocate a CMV to another parking space for safety may need to evaluate the current FMCSA personal-conveyance guidance. The purpose, duty status, location, and who benefits must all be identified before selecting a category.
Loading, inspection, and waiting do not become YM
YM applies to qualifying vehicle movement. The surrounding work keeps its ordinary status. A pre-trip inspection, coupling check, fueling, loading supervision, paperwork, dock check-in, seal verification, or waiting while required to remain ready for work is generally on-duty not driving, but it is not itself a yard move. End the category when the movement ends and record the activity accurately rather than leaving YM active across an entire warehouse visit.
Team drivers and yard personnel still need correct attribution
The driver at the controls must be authenticated and use the correct account. A co-driver should not claim YM performed by the other driver, and a road driver should not accept unidentified yard movement without confirming who operated the vehicle. If a yard hostler who is subject to the HOS and recordkeeping rules moves the unit, the carrier must address that person's records accurately. Assigning every low-speed event to whichever driver has the most available hours undermines the integrity Section 395.30 requires.
Yard status does not relax vehicle or pedestrian safety
A private yard can contain blind corners, dock workers, forklifts, hostlers, pedestrians, tight trailer rows, uneven pavement, low-speed collisions, and unexpected traffic. Follow facility speed limits, wear required PPE, use lights and four-way flashers as directed, inspect the route, control the trailer swing, confirm door and landing-gear clearance, use GOAL when backing, and communicate with spotters. YM is a recordkeeping classification, not a waiver of CDL, inspection, equipment, cargo, or safe-operation rules.
Prepare for a roadside or audit review
The ELD display and output should identify YM with the required visual treatment and abbreviation when the carrier enabled the category. During a review, be ready to explain the facility, route, purpose, time, and carrier policy. Location, odometer, engine-hour, shipping-document, gate, dispatch, and trailer records may be compared with the log. Repeated long YM periods, movement across open roads, missing annotations, or selections that begin after motion can draw questions even when the driver believed the move was minor.
Carriers should map approved routes and train scenarios
A useful policy names approved facilities and internal routes, explains how public access is restricted, states who can authorize borderline moves, configures driver accounts, and gives screenshots for beginning and ending YM. Training should include a dock-to-staging move, an engine restart, a gate exit, a public-road shuttle, a missed selection, a team-driver handoff, and a 30-minute break scenario. Periodic audits can compare YM events with GPS, gate, trailer, and dispatch records and correct misunderstanding before it becomes routine.
Use a six-step yard-move decision before every movement
Ask: Is the carrier's YM option authorized for me? Is the entire route within a qualifying private or restricted-access yard? Is the movement work-related and therefore on duty? Have I selected on-duty not driving and YM before motion? Can I describe the facility, route, and purpose accurately? Will I stop and deselect YM before leaving the qualifying area or changing activities? If any answer is uncertain, keep the vehicle stationary and contact safety or compliance. A dispatcher label or a short distance is not enough.
Verify the current rule and the actual facility
This guide was reviewed November 20, 2026 against 49 CFR 395.3, 395.8, 395.28, 395.30, and Appendix A displayed by eCFR as current through November 18, 2026, plus current FMCSA ELD and HOS guidance. It is an educational logging guide, not a determination that a particular road, port, terminal, warehouse, or parking area qualifies as a yard. Drivers and carriers should evaluate the real access, route, carrier policy, ELD configuration, State law, and current federal guidance before the CMV moves.
Educational summaries help you prepare, but official FMCSA and state licensing sources remain the authority for current requirements.
Official sources
49 CFR 395.28 — Special driving categories ↗49 CFR 395.30 — ELD records, edits, annotations, and retention ↗49 CFR 395.3 — Property-carrier maximum driving time ↗Appendix A to Part 395 — ELD functional specifications ↗FMCSA — Using ELDs and special driving categories ↗FMCSA Guidance — Private-property yard time is on-duty not driving ↗FMCSA ELD Guidance — How yard moves appear on the ELD ↗FMCSA ELD Guidance — Missed YM selection cannot be edited into YM ↗FMCSA HOS FAQ — Yard moves and the 30-minute break ↗ELDT.live independently creates and reviews its content. We do not present practice questions as official examination questions and do not guarantee a licensing result.